Choose language 中文 English

    SLAD Series Heated Type Desiccant Air Dryer

    Brief introduction:

    Working Conditions And Technical Specifications

    Air inlet temperature:20-45℃ 

    Air inlet pressure:0.6-1.0MPa

    Regeneration air consumption:≤7%

    Pressure loss:≤3% of the inlet pressure

    Inlet air Oil content:≤0.01PPM

    Pressure dew point:-40℃ Standard type

    Working way:Two towers alternate and continuous work

    Control method:Computer program control/PLC control

    Regeneration mode:Micro-heating regeneration

    Power supply

                        1-6 Nm3/min AC220V/50Hz

                        8Nm3/min and above AC380V/220V/50Hz

    Cycling time:T=2-6 hours

    Installation way:Indoor installation without foundation

    Note:Above parameters pressure standard is based on standard pressureof 0.7 MPa

     (Other special requirements can be customized)


    Description

    Model Specification

    Optional Accessories

    Feedback

    Features

    1.High-quality switching valves,stable and reliable,can guarantee the integrity of the

       workflow and extend the working life of components

     2.Use the high activated oxide alumina with uniform shape and size,high strength,with

       low dew point,producing less dust with long lifetime

     3.Adjust teh amount of regenerated gas according to the operation load demand of

       equipment to achieve teh energy-saving effect

     4.Special air diffusion device,automatic generation to ensure the lifespan of the air dryer

     5.Programmable micro-computer controller,can adjust the adsorption and generation

       time to meet your satisfied dew point

       

    Using pneumatic butterfly valve, reliable performance, switching Stable, accurate operation, to ensure the stable operation of equipment.


     


    Stainless steel electric heater, small volume, high power, Fast response, high precision, high heating temperature, Long service life.



    Using high quality pilot solenoid valve, accurate action, To ensure the stable operation of equipment.



      

    Using high quality pneumatic butterfly valve, reliable performance, switching Stable, accurate operation, to ensure the stable operation of equipment.


     

     



    Using special high quality muffler, effectively reduce the noise of products.

     

     


     



                                                  

     

     

    SLAD series heat regenerative adsorption dryer is energy-saving products of our latest design, development, to reach the domestic advanced level. This series of products in heat regeneration and without heat regeneration advantages, to form the micro regenerative heating mode, thereby reducing the regeneration gas consumption, to achieve the purpose of energy saving. According to the principle of PSA, using efficient adsorbent America technology in production, according to the liquid particle capillary adsorption in the air, at the same time through the micro heating off the adsorbed moisture, in order to achieve the purpose of purification of compressed air. The equipment made of double cylinder form, the automatic PLC control, two cylinder alternating continuous operation.



     





    Item

    Capacity

    (Nm3/min)

    Heater

    Power

     (kw)

    Desiccant

    Weight

     (Kg)

    Connection

    N.W

     (Kg)

    L

    (mm)

    W

    (mm)

    H

    (mm)

    SLAD-1MXF

    1.2

    1

    24

    G1"

    186

    812

    620

    1417

    SLAD-2MXF

    2.5

    1.2

    40

    G1"

    256

    732

    586

    2017

    SLAD-3MXF

    3.6

    1.5

    60

    G1"

    341

    962

    639

    1711

    SLAD-4.5MXF

    4.8

    2.1

    85

    G1-1/2"

    447

    842

    642

    2225

    SLAD-6MXF

    6.8

    3

    120

    G1-1/2"

    630

    950

    642

    2105

    SLAD-8MXF

    8.5

    4

    158

    G2"

    678

    1288

    696

    2231

    SLAD-10MXF

    10.9

    5

    190

    G2"

    810

    1288

    696

    2331

    SLAD-12MXF

    12.8

    5

    190

    G2"

    810

    1288

    696

    2331

    SLAD-15MXF

    16

    6

    310

    DN65

    983

    1743

    735

    2356

    SLAD-20MXF

    22

    8

    492

    DN65

    1271

    1933

    736

    2415

    SLAD-25MXF

    26.8

    10

    578

    DN80

    1371

    1903

    823

    2738

    SLAD-30MXF

    32

    12

    600

    DN80

    1550

    2101

    913

    2462

    SLAD-40MXF

    43.5

    15

    856

    DN100

    1994

    2200

    1002

    2576

    SLAD-50MXF

    53

    18

    1002

    DN100

    2127

    2213

    1002

    2594

    SLAD-60MXF

    67

    22

    1718

    DN125

    3243

    2716

    1270

    2857

    SLAD-80MXF

    90

    27

    2300

    DN125

    3698

    2816

    1453

    2911

    SLAD-100MXF

    110

    36

    2800

    DN150

    4677

    3312

    1751

    3094

    SLAD-120MXF

    130

    42

    3370

    DN150

    5140

    3420

    1900

    3159

    SLAD-150MXF

    160

    54

    4070

    DN200

    6126

    3812

    1900

    3378

    SLAD-200MXF

    210

    72

    5530

    DN200

    8370

    4224

    2235

    3534

    SLAD-250MXF

    260

    96

    6116

    DN250

    13100

    4324

    2647

    3805

    SLAD-300MXF

    310

    120

    7016

    DN250

    15000

    4824

    2802

    3883



    • Pneumatic butterfly valve

    • Pressure dew point meter

    • Special voltage

    • Electric heater

    • Pilot solenoid valve

    • Adsorbent